Difference: ObjetAlaris30 (27 vs. 28)

<-- 
 -->
	

• Press the material check button. It will display amounts in the status bar at the bottom. Compare these to the levels listed in the main printer application on the other computer.
• Start the print job.

• Clean the tray: Scrape off the excess support material from the print tray with the scraper. Spray some water on the tray and wipe off with a lint-free microfiber cloth. (Supplies are in the box under the table).

Resuming a print

• User guide: DOC-04000_A_UserGuide.pdf. The vendor supplied hard copy one lives in the printer toolbox under the printer table.
• Operator training guide (basic training): 3_ObjetTrainingForOpertorDOC-04023.pdf

• Parts postprocessing guide: Postprocessorapplications7-07.pdf
• Painting printed parts: Penetrating_Dye_Letter_Low.pdf