| |
| META TOPICPARENT |
name="PsmSpace" |
<-- -->
|
| |
- Press the material check button. It will display amounts in the status bar at the bottom. Compare these to the levels listed in the main printer application on the other computer.
- Start the print job.
|
|
<
< |
- You can pause a print from the host machine if you need for example to take out a part that is done.
|
| |
- Use the spatula to pick up the parts. Be careful of not hitting the head by chance.
- Clean the tray: Scrape off the excess support material from the print tray with the scraper. Spray some water on the tray and wipe off with a lint-free microfiber cloth. (Supplies are in the box under the table).
|
|
<
< | |
>
> | Resuming a print
- Note the "last slice" number
x from the printer controller machine
- Hit the resume button on the Job Manager, and enter
x+1 (NOTE the +1) when prompted for the start slice number. (here is why you need to know x: the printer can stop printing because of an error or because you paused it -- but the job manager wouldn't know precisely at which slice (x) the printer stopped because the job manager sends out 8 slices at a time to the printer)
- You can pause a print from the host machine if you need for example to take out a part that is done.
Detailed documents
- User guide:
DOC-04000_A_UserGuide.pdf. The vendor supplied hard copy one lives in the printer toolbox under the printer table.
|
| |
|
Copyright © 2008-2025 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.