Difference: ObjetAlaris30Maintenance (10 vs. 11)

Revision 112011-12-13 - MushfiqurRouf

Line: 1 to 1

META TOPICPARENT	name="ObjetAlaris30"

<--  -->

Line: 27 to 27

Date	Weight test

Changed:

<
<

Model		Support		Thickness
Voltage	Weight	Voltage	Weight	Thickness
init	38.52 V	5.03 g	30.17 V	4.78 g	28.0 μ
26-May-2011	38.66 V	5.05 g	30.12 V	4.80 g	28.0 μ
?	44.51	5.14	30.16	4.64	28.0 μ
12-Dec-2011	42.6	4.99	30.93	4.73	28.0 μ

>
>

Model		Support		Thickness	Notes
Voltage	Weight	Voltage	Weight	Thickness	Notes
init	38.52 V	5.03 g	30.17 V	4.78 g	28.0 μ
26-May-2011	38.66 V	5.05 g	30.12 V	4.80 g
?	44.51	5.14	30.16	4.64
12-Dec-2011	42.6	4.99	30.93	4.73		Done under wrong Z start
13-Dec-2011	39.73	5.04	29.89	4.85		Redone after fixing wrong Z start

~16-Sep-2011: cleaned the roller/knife assembly (see below) because the printer was making a loud noise while printing. Noise went away.
Memo1.m4a: Brad's recording of the printer noise

Line: 86 to 86

Go online. The printer prints two patches: one with only model (right one), one with support (left one).
Weigh them separately.
From maintenance>calibration, record the current voltages

Changed:

<
<

Use the recalibration excel sheet for checking if the voltages need to be modified.

>
>

Use the recalibration excel sheet for checking if the voltages need to be modified.

repeat if needed.

Aligning print heads

Once every 6 months, or sooner if quality suffers.

Line: 159 to 159

Installation guide: DOC-04006_Alaris30Installation_3.pdf
Transparency test: XY alignment, overall. Parameters page.
Head alignment test: run wizard. Check the user guide for details.

Changed:

<
<

Weight test: (see in the head maintenance section) for voltage calibration. Excel file: Alaris30_Adjustment_Ver11_Master.xls

>
>

Weight test: (see in the head maintenance section) for voltage calibration. [[https://docs.google.com/spreadsheet/ccc?key=0AkW7aJp8zUjtdGdfcldrRlNBTXpYaW54bndRWGQxc1E][GDocs] or Excel file: Alaris30_Adjustment_Ver11_Master.xls

Pattern test: (see in the head maintenance section) check for clogged nozzles.

View topic | History: r11 < r10 < r9 < r8 | More topic actions...