Difference: ObjetAlaris30Maintenance (9 vs. 10)

Revision 102011-12-13 - MushfiqurRouf

Line: 1 to 1

META TOPICPARENT	name="ObjetAlaris30"

<--  -->

Line: 31 to 31

Voltage	Weight	Voltage	Weight
init	38.52 V	5.03 g	30.17 V	4.78 g	28.0 μ
26-May-2011	38.66 V	5.05 g	30.12 V	4.80 g	28.0 μ

Added:

>
>

?	44.51	5.14	30.16	4.64	28.0 μ
12-Dec-2011	42.6	4.99	30.93	4.73	28.0 μ

~16-Sep-2011: cleaned the roller/knife assembly (see below) because the printer was making a loud noise while printing. Noise went away.
Memo1.m4a: Brad's recording of the printer noise
Decision: print large thin objects so that the whole roller/knife assembly gets used.

Added:

>
>

~1-Dec-2011: recurring noise problem, replaced the roller blade assembly with the spare. Ordered one more spare on 12 Dec

~12-Dec-2011: Z-axis seems to be unaligned. sent an email to mark.

If print quality is not satisfactory:

run a pattern test (see below) to check for clogged nozzles.
- try purging, and cleaning the head (see below). Purge multiple times. Really clean the head, make sure there is no residue.

View topic | History: r11 < r10 < r9 < r8 | More topic actions...